Perlgear TV stand PGLF8B-N1
The Perlgear PGLF8B-N1 TV stand is a fully articulating model designed for flat and curved televisions with screen sizes from 42 to 90 inches and a weight capacity of up to 68 kg. It supports VESA standards from 200 × 100 to 600 × 400 mm, and its double-jointed arms allow the screen to swivel ±50°, tilt from +5° to -15°, and adjust the distance from the wall within a range of 76.2 to 421.6 mm. The stand is designed for mounting on solid concrete and brick walls, as well as on stud walls with studs spaced at a standard interval of 16-inch (approximately 40.6 cm).
Adjust the screen position according to where you watch it from
The movable design lets you angle the TV toward the sofa, armchair or another part of the room without changing the mounting location. The ±50° swivel range makes it easy to position the screen left or right, while the +5° to -15° tilt range helps adjust the viewing angle and reduce distracting light reflections. After mounting, you can further adjust the screen level within a range of ±3°, allowing you to position the TV precisely.
Extendable design – from 76.2 to 421.6 mm
The Perlgear PGLF8B-N1 can extend up to 421.6 mm from the wall, which makes it easier to use the available swivel range and access the connectors on the back of the TV. When retracted, the stand sits 76.2 mm from the wall, minimising the space it takes up. The included cable ties help organise cables behind the screen.
Reinforced double arms
The design features two steel arms which, according to the manufacturer, are 30% thicker, resulting in greater rigidity when supporting a large screen. The stand's maximum load capacity is 68 kg, and additional safety features include a locking mechanism and end caps that prevent mounting components from accidentally slipping out.
Easier setup and installation
The kit includes a wall template, spirit level, instructions and the necessary mounting hardware, which makes it easier to correctly mark the mounting position. The simplified design of the front support beams uses fewer screws, making assembly of the individual components more efficient. The stand must not be mounted solely into plasterboard – the base and mounting method must be suitable for the weight of the TV and the structure of the wall.
Included in the box
- Arm and wall plate mount
- TV mounting rails
- Front support beams
- Cover caps
- TV mounting hardware kit
- Wall mounting hardware kit
- Spirit level
- Wall mounting template
- Cable management straps
- User manual
- Quick installation guide
| Manufacturer |
Perlgear |
| Model |
PGLF8B-N1 |
| Type |
Full-motion TV wall mount |
| Compatible TVs |
flat and curved |
| TV screen size |
42–90" |
| Maximum load |
68 kg |
| VESA |
200 × 100 to 600 × 400 mm |
| Supported VESA sizes |
200 × 100, 200 × 200, 200 × 300, 200 × 400, 300 × 200, 300 × 300, 300 × 400, 400 × 200, 400 × 300, 400 × 400, 500 × 400, 600 × 400 mm |
| Horizontal swivel |
±50° |
| Tilt |
+5° / -15° |
| Post-installation level adjustment |
±3° |
| Maximum extension from wall |
421.6 mm |
| Minimum distance from wall |
76.2 mm |
| Construction |
double steel arms |
| Arms |
30% thicker according to manufacturer specifications |
| Installation |
solid concrete, brick and studs spaced 16" (approximately 40.6 cm) apart |
|
