Skip to content

SINK 60/80 POLYMER MARBLE 218

by FAT
SKU DGT0496207

Избери период за изплащане и виж месечната вноска

Месечна вноска Обща сума за плащане ГПР Лихва Банка

Description

Kitchen sink made of polymer marble, with high resistance to prolonged exposure to sunlight. Coating with high resistance to aggressive household chemical cleaners. High degree of antibacterial protection of the coating, thanks to the technology with the addition of silver ions.

• Pre-set technological holes for a mixer tap and/or liquid soap dispenser, with options for individual drilling at the customer's choice.

• Rich variety of colours: check here

• The technology works through the addition of silver ions. Once applied, they provide constantly active antibacterial protection, and the level of bacteria on the surface is reduced by up to 99% within two hours and by up to 80% within the first 15 minutes.

Dimensions:

Width of the bowl: 51 cm.
Length of the bowl: 41 cm.
Length of the sink: 60 cm.
Depth of the bowl: 21 cm.
Width of the sink: 80 cm.

Package contents:

• Italian siphon Ø90 mm with overflow and option for additional connection of a washing machine/dishwasher.
• Paper template for cutting the worktop
• Certificates and instructions

Maintenance and care of polymer marble sinks

• Do not place hot cookware directly from the hob onto the sink – there is a risk of damaging the coating;

• Do not use abrasive cleaners and sharp cleaning tools. 

• Dry the surface with a soft cloth or kitchen paper – this avoids limescale deposits and stains;

Drilling the technologically pre-set holes for a mixer tap and/or liquid soap dispenser:

• Using a hammer and a drilling tool, tap several times on the marked centre;

• Continue tapping from the centre towards the periphery of the hole until it is finally shaped;

• Clean any remaining unevenness along the periphery with sandpaper or another suitable abrasive tool.

Installation instructions for composite kitchen sinks

• Trace the outline of the template included with the sink onto the kitchen worktop;

• Cut the worktop on the inside of the traced outline – so that the line remains visible after cutting;

• If necessary, drill the hole(s) for the mixer tap and/or liquid soap dispenser, following the instructions below;

• Clean the contact surfaces – those of the worktop and of the sink – with alcohol, and apply a thin layer of transparent silicone;

• Place the sink in the opening and press it lightly against the worktop, using some weight;

• Remove the silicone that oozes out at the edges and clean off the residue;

• Once the silicone has fully dried, remove the weight – the sink is ready for use

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare