LACQUER FOR WOODEN FLOORS SATIN 1 L.

Single-component water-based clear varnish for wooden floors, transparent, based on polyurethane resin. Suitable for application on parquet, flooring and staircases made of new or old wood, in interior rooms. Spreads excellently, odourless, does not yellow and dries quickly. Easy to apply, provides a smooth surface, high hardness and high resistance to abrasion and scratching, resistant to water and cleaning agents.

• Surface drying time 1-2h
• Dilution percentage with water 5%
• Consumption 10-12m2/lt
• Application by brush, roller, spray gun

COLOURS:
Colourless. Available in gloss and satin finish variants.

SURFACE PREPARATION:
Surfaces must be dry and clean, free of dust, resins and grease, and old floor surfaces must be well sanded.
Initially apply two coats of water-based floor primer, then lightly sand the surface with fine sandpaper.

APPLICATION:
Before use, the product must be stirred thoroughly. Apply in two coats with a roller or brush, diluted by adding 5% water. The product should not be applied at temperatures below 5°C, above 35°C and/or at relative humidity above 80%.
The applied layer is dry to the touch after 1-2 hours. The next coat is applied after 6-8 hours, after the surface has been sanded beforehand. The given times vary depending on atmospheric conditions (relative humidity and temperature).
Tools are cleaned immediately after use with water and, if necessary, washed with soap or detergent.