Description
The Ermenrich NetGeeks NL80 cable length tester can measure cable lengths up to 1000 metres, and it also has other features. It can check cables for breaks and short circuits, as well as split, crossed and reversed pairs. It can also measure the distance to break and short-circuit points. The Ermenrich NetGeeks NL80 can trace cables, detect cables connected to a router or switch among many others, perform PoE and PING tests, and save the results to a memory card.
The cable length tester supports various cable types: STP/UTP (CAT5E, CAT6, CAT6A, CAT7) network cables, telephone cables, coaxial cables, plain wires. Its operating method is based on the TDR technique (time-domain reflectometry for measuring time characteristics). The results are very accurate and there is an option to calibrate the device. The device is resistant to crosstalk.
All included devices are powered by rechargeable batteries. The transmitter can operate for about 20 hours on a single charge, and the receiver for 50 hours. It has an automatic shut-off function.
Main features:
- Tracing and checking various types of cables: network, coaxial, telephone, etc.
- The technology is reflectometry for measuring time characteristics (TDR)
- Maximum measured distance – 1000 metres
- Detecting a cable in a cable bundle, tracing a cable connected to a switch/router by locating a port with a blinking indicator
- Wire mapping: short circuits, crossed pairs, breaks
- Measuring the distance to the location of breaks and short circuits
- PoE and PING tests, automatic IP address assignment, saving data to a memory card
The kit includes:
- Transmitter
- Receiver
- Remote unit
- Connecting cable RJ11
- Connecting cable RJ45
- Crocodile clip
- DC cable
- MicroUSB cable
- Carrying bag
- Memory card
- User manual and warranty card
Specifications
| Warranty | 5 years |
|---|---|
| Packaging size (L x W x H) | 21x24x8 cm |
| Shipping weight | 0.815 kg |
| Ports | BNC, RJ11, RJ45, microUSB |
| Cable types for tracing | STP/UTP (CAT5E, CAT6, CAT6A, CAT7) network cables, coaxial cable, plain wires, telephone cable |
| Cable types for checking | STP/UTP (CAT5E, CAT6, CAT6A, CAT7) network cables, coaxial cable, plain wires, telephone cable |
| Cable length measurement | yes |
| Cable checking | yes, + (breaks, short circuits, crossed, reversed and split pairs, crosstalk) |
| Port flash function | yes, + |
| Cable tracing | yes |
| Crosstalk protection | yes |
| PoE test | yes |
| PING test | yes |
| Measurement method | time-domain reflectometry for measuring time characteristics (TDR) |
| Measurement units | metres/yards, feet |
| Measuring range, m | 0 — 1000 |
| Error | 3 (±0.5 m) |
| Measuring the distance to the break location | yes |
| Measuring the distance to the short-circuit location | yes |
| Calibration | + |
| Minimum calibration cable length, m | 20 (a 50 m cable is recommended) |
| Calibration error, % | 2 (±0.5 m) |
| Maximum operating current, mA | <100 |
| Protection | input voltage: 48 V, current: 5 mA |
| Data transfer | +, up to 50 memory slots (*.txt format) |
| Display | liquid crystal display, colour |
| Display diagonal, inches | 2.8 |
| Display resolution, pixels | 320x240 |
| Display backlight | yes |
| Power supply | 3.7 V, 1800 mAh, charging via a DC adapter 5 V, 1 A (not included) and microUSB cable (included) |
| Battery life, hours | 50 |
| "Low battery" status indicator | yes |
| Automatic power-off | 120 min, 15 min, 30 min, 60 min |
| Operating temperature range, °C | −10… +60 |
| Operating humidity range, % | 20…70 |
| Adjustable sensitivity | yes |
| Non-contact voltage detection (NCV) | yes |
| Flashlight | yes |