Description
ISOMAT MULTIFILL-EPOXY THIXO epoxy grouting compound, light grey, 3 kg
Chemically resistant grout for bathrooms, swimming pools and professional kitchens, which also works as an adhesive for floor tiles.
ISOMAT MULTIFILL-EPOXY THIXO is a two-component solvent-free epoxy grouting compound in light grey, supplied in a 3 kg pack (A+B). It fills horizontal and vertical joints 1.5-10 mm wide and is also applied as a tile adhesive. It is classified as an R2 type adhesive under EN 12004 and an RG type grouting compound under EN 13888.

Resistance to acids, alkalis and salt water
The hardened grout withstands diluted acids, sodium hydroxide, cleaning agents, chlorine and sea water without changing the surface. For this reason the compound is used in breweries, slaughterhouses, dairies, laboratories and swimming pools. Water absorption after 240 min remains below 0.1 g, which stops contaminants from penetrating the joint.
Strength for heavy-traffic areas
Compressive strength exceeds 45 N/mm² and flexural strength 30 N/mm², with abrasion resistance below 250 mm³. The floor can be partially used after 48 h and takes full load after 7 days at +23 °C. The working temperature range is from -30 °C to +80 °C, including regular cleaning with hot water.
Ready-made mixing ratio and 45 minutes working time
Component B is packed in the packaging of component A in the exact ratio 100:6.5 by weight, so on-site dosing is unnecessary. Mixing takes about 5 minutes with a low-speed mixer at 300 rpm. Cleaning the tiles is carried out within the same 45 minutes with a damp hard sponge.
Thixotropic consistency for vertical joints
The consistency holds the material in wall joints without sagging, and the reduced slip is part of the R2 classification under EN 12004. Shrinkage on drying remains below 1.5 mm/m and the joint keeps its flatness. The surfaces are suitable for direct contact with food products according to W-347, EPA 330.5 and EPA 110.2.