Description
The Ermenrich Ping MK10 digital clamp meter is a portable measuring instrument that does not require breaking the circuit to measure current, thus ensuring safe work on electrical networks and electrical equipment. Digital clamp meters are indispensable when it is not possible to switch off the electricity and are convenient for measurements in hard-to-reach places.
The device combines the functions of a voltmeter (measuring DC and AC voltage), an ammeter (measuring AC current) and an ohmmeter (measuring resistance). Calculations are performed using the true root mean square value (True RMS), so the accuracy of measuring AC parameters is high. Additional functions of the model are continuity testing of circuits and diode testing for faults.
Measurement results and operating parameters of the device are shown on the built-in display. The display backlight makes work easier in low light and in complete darkness. There is a Data Hold function, which is useful in situations where it is impossible to read the values from the device at the moment. When activated, they will be "frozen" on the display and can be viewed later.
Two standard batteries are required to operate the device. The automatic power-off function helps save energy. When the batteries are depleted, a notification will appear indicating that they need to be replaced.
Key features:
- AC current measurement without breaking the circuit
- DC and AC voltage, resistance measurement
- Diode fault diagnostics (open circuits and short circuits), circuit checking for short circuits and open circuits
- Data Hold function for "freezing" the display readings keeps the maximum value
- True root mean square (True RMS) – calculation of AC parameters with high accuracy
- Battery power, automatic power-off function
The kit includes:
- Clamp meter
- Probes
- User manual and warranty card
Specifications
| Warranty | 5 years |
|---|---|
| Package dimensions (L x W x H) | 18x10x4 cm |
| Shipping weight | 0.255 kg |
| Measurement range selection | automatic, manual |
| Maximum jaw opening, mm | 25 |
| Basic functions | ammeter, voltmeter, ohmmeter |
| DC voltage measurement range | 200 mV/2 V/20 V/200 V/600 V: error ± (0.5% + 5) |
| AC voltage measurement range | 2/20/200/600 V: error ± (1.0% + 5) |
| AC current measurement range | 2/20/200 A: error ± (2.5% + 8) |
| Resistance measurement range | 200 Ω/2 kΩ/20 kΩ/200 kΩ/2 MΩ/20 MΩ: error ± (1.0% + 5) |
| Wire mapping | yes |
| Circuit continuity test | + |
| Diode test | yes |
| Diode check | + |
| Hold function | yes |
| Limit value function (Min./Max.) | yes, + (maximum values only) |
| Number of display counts | 2000 |
| Display backlight | yes |
| Safety standards | EN61010-1,-2-030; EN61010-2-033; EN61326-1 |
| Overvoltage category | CAT. III 600 V |
| Power supply | 2 AAA batteries (not included) |
| Battery-low status indicator | yes |
| Automatic power-off | yes |