Description
The Ermenrich Verk FB20 tester is a small device with simple controls, used to check the quality of brake fluid. During vehicle operation, moisture can accumulate in it, which reduces its performance properties. If too much moisture accumulates, the brake system may be damaged. For this reason, it is recommended to check the brake fluid regularly.
The tester works on the principle of measuring the conductivity of the fluid. The tester probe is placed in the brake fluid; by default it operates in DOT 3 mode, and pressing a button switches it to DOT 4 or DOT 5.1 mode. The device performs the measurement within a few seconds: the moisture percentage appears on the screen, and the display turns green, yellow or red. A value in the range 0–2% and a green screen indicate that everything is fine. A value of 2–3%, a yellow screen and an audible signal indicate that the brake fluid should be replaced. A reading of 4% with a red screen and a rapidly pulsing audible signal indicates that the brake fluid must be replaced immediately.
The device runs on batteries. To carry out reliable measurements, it is necessary to monitor their charge: the device will notify you whether replacement is needed.
Main features:
- Measures the relative amount of moisture in brake fluid
- Light and sound notifications of measurement results
- Built-in backlit display with various colours
- Battery power, automatic shut-off function
Characteristics
| Warranty | 5 years |
|---|---|
| Package size (L x W x H) | 18x3x4 cm |
| Shipping weight | 0.08 kg |
| Moisture detection range, % | 0 — 4 |
| Sound signal | yes |
| Display | Liquid crystal display |
| Display backlight | yes |
| Safety standards | EN61326-1 |
| Light warning | yes |
| Power supply | 2 AAA batteries (not included) |
| Automatic power-off | yes |
| "Battery depleted" status indicator | yes |