Optiva Satin Matt 7
The latest generation, satin-matt, stain-resistant, water-based latex acrylic composite paint for tinting. The modern encapsulation technology used in the paint increases the barrier properties of the painted surface. For decorative painting of walls and ceilings in residential, office, and public buildings, in schools and healthcare facilities (hospitals, schools, kindergartens, clinics, offices, operating rooms, treatment rooms, laboratories, dialysis stations, etc.), workspaces, manufacturing plants, as well as the food industry without direct contact with food.
• Very good hiding power;
• Increased resistance of the paint surface to stains, dust, and dirt;
• The product contains no volatile organic compounds;
Color shades:
• Feel the Color 2020, Deco Grey colour card, Symphony Color System, Pro Grey, Deco Grey Opaques
• Colors from Tikkurila Symphony, Tikkurila Deco Grey, NCS, RAL catalogs
• Palette of shades of over 13,000 colors
Gloss:
Satin. According to standard: PN-EN 13300 gloss [7]
Coverage:
16 m² / liter per coat. Coverage depends on many factors such as absorbency, substrate texture, application method, and color. Exact paint consumption can only be determined in practice by test painting on the target surface.
Thinner:
Water. If necessary, dilute with water up to 5%.
Recommended use:
Painting of plasterboard, gypsum, cement and lime plasters, decorative painting of concrete substrates, as well as for renovating old coatings. The product can be used on small wooden and metal surfaces. Before application, the surface must be primed with a suitable primer.
Easy application:
• Drip-free formula;
• Very good adhesion to the surface;
• Easy spreading of the paint;
• Optimal drying time;
** It is recommended to remove stains no later than 15 minutes after the dirt gets on the paint surface;
Application method: Brush, roller, spray (nozzle: 415/418, pressure: 150-180 bar) - dilution with water up to 5% by volume.
Drying time: At 23°C and 50% relative air humidity, the paint takes approximately 2 hours to dry. The interval between applying coats should be at least 4 hours. At lower temperatures and higher humidity, the time between applying coats should be longer.
Resistance to wet scrubbing:
Highest - 1st class (according to standard: PN-EN 13300:2002). (PN-EN ISO 11998:2007P). In case of surface contamination, water with a mild detergent can be used for cleaning.
Light resistance: Resistance test of surface irradiation with UVC germicidal lamps - surface type and color shade do not change after 8 hours of irradiation.
Why choose Optiva Satin Matt 7
Exceptional durability
The paint provides a beautiful, satin-matte, smooth finish with the highest resistance to wet scrubbing (class 1, PN-EN 13300).
Encapsulation technology
Encapsulation technology provides increased surface resistance to dirt, dust, and stains. Highest resistance to wet scrubbing (class 1, PN-EN 13300).
Health and environmentally friendly
International EU Ecolabel certificate and recommendation of the Polish Allergy Association. Zero % VOC.
APPLICATION INSTRUCTIONS:
Application conditions: All surfaces intended for coating must be dry, the air temperature must not be lower than +5°C and not higher than +25°C, and the relative air humidity must be below 80%.
Surface preparation:
Unpainted surfaces: New plaster and concrete substrates can be painted 4 weeks after complete drying. Clean these surfaces from dust and dirt, smooth out unevenness and weak spots with filler. Plasterboard, drywall, and joint compound can be painted after they are completely dry. In case the surface irregularities are significant, the wall must be leveled with a leveling mortar and then a smooth filler should be applied over the entire surface. In case of minor irregularities, you can apply smooth filler directly. The use of the aforementioned mortars and fillers must be carried out in accordance with the product data sheets for these products. Machine-applied plaster with a visibly glossy aggregate surface must be sanded and dusted. Then apply one coat of Optiva Primer.
Previously painted surfaces: Wash the surface before coating and degrease with Maalipesu, remove dirt and weak and peeling fragments of the old coating. Sand glossy surfaces and smooth out unevenness with filler. Paints with a glossy effect - satin, semi-matte, semi-gloss, and gloss must be sanded over the entire surface before final dusting. When sanding, use 150-200 grit sandpaper. Prime the entire substrate with Optiva Primer. Priming can only be skipped if the existing coating is completely intact (the manufacturer is not responsible for incorrect assessment of the actual condition of the substrate).
Surfaces treated with glue or painted with lime paints: Thoroughly remove lime paint or glue. Clean surfaces from dust and dirt, smooth unevenness with filler. Then apply one coat of Optiva Primer. In case of a weak substrate, prime with Tikkurila Suprabilit.
Note: It is recommended to check whether the applied filler has a sound and stable surface; if, after a light wipe with the hand, the compound falls off or leaves dust on the hand, it means that the surface is friable and must be primed with Tikkurila Suprabilit.
Topcoat: Before painting, dilute a sufficient amount of paint from a single production batch to avoid potential color differences. Mix the paint thoroughly before application. Depending on the porosity of the substrate, apply 2 coats of Tikkurila Optiva Matt 5 with a brush, roller, or spray. For colors with particularly low hiding power (marked in the tinting system), additional coats may be required. When applying colors marked in the tinting system as low hiding (LH) and intensive colors from base C, it is recommended to use Tikkurila Optiva Primer tinted to a color close to the color of the topcoat. The masking tape delimiting the painted surface should be removed immediately after painting, before the paint dries. The use of ANZA painting tools is recommended.
Note: The coating achieves full wet scrubbing resistance quality, according to PN-EN 13300, 28 days after completion of painting.
Please note that quantities are limited and dynamic. At the time of ordering, the item may be out of stock. We will notify you in a timely manner in the event that we are unable to fulfill the order.