ONE FACADE PAINT WHITE 9L

Yedinka facade paint, white

Ecological dispersion – acrylic paint for exterior and interior use. Creates matt surfaces resistant to atmospheric conditions, provides a long-lasting decorative effect. The product has very good adhesion to the surface. The microporous paint layer provides micro-ventilation of the painted surface.

The product is used as a decorative and protective coating on exterior cement and cement-lime plasters, as well as for walls and ceilings in residential, office and public buildings and for decorative painting of concrete surfaces.

Colour: White, base tinted into 237 shades
Gloss: Matt
Coverage: Up to 8 m²/l per coat. Actual spreading rates depend on the absorbency of the substrate and the method of application
Drying time: At a temperature of +23°C, 2 – 3 hours

SURFACE PREPARATION

New, unpainted surfaces must be dry and thoroughly cleaned of any peeling paint, dust, grease and other contaminants that may impair paint adhesion.
New plasters and concrete substrates may be painted after 4 weeks of natural ageing (we recommend waiting with painting new buildings until after the first heating season, during which time the construction moisture will evaporate), after priming with JEDYNKA® FASADOWA, diluted with water up to 30%. In case of renovation, remove all peeling old paint, treat lime substrates by sandblasting and matt glossy surfaces by sanding, then clean the surfaces of dust and wash with water before painting. Layers of lime and adhesive must be completely removed to expose the plaster. Uneven surfaces and cracks must be levelled with cement-lime filler and then primed with diluted paint.

PAINTING

The paint can be applied with a brush, roller or by airless spraying. Stir the paint thoroughly before application. The product does not require dilution. It is recommended to apply 2–3 coats. Adding lime or talc to the product is not permitted.
The paint dries in about 2 hours. Subsequent coats may be applied no earlier than/after 4 hours. Painting should be carried out at temperatures from +5°C to +25°C.

Note! To avoid shade differences, use paint from the same production batch.